When handling motors, lifting devices are often needed, whether they be cranes, forklifts or otherwise. Given the risks inherent to lifting, EASA members must exercise caution and ensure our teams are well versed in proper rigging techniques.

Al manipular motores, a menudo se necesitan dispositivos de izaje, ya sean grúas, montacargas o de otro tipo. Dados los riesgos inherentes al izaje, los miembros de EASA debemos actuar con precaución y asegurarnos que nuestros empleados conozcan bien las técnicas de manipulación adecuadas.

Los PCB han sido identificados como un probable carcinógeno para los humanos. Si se le pide a su centro de servicios que recoja un equipo que se sospecha PUEDE contener PCB, haga que lo prueben en campo ANTES de recogerlo. De esta forma, la responsabilidad sigue siendo del cliente. Una vez que recoja un dispositivo que contiene PCB, la responsabilidad es suya.

PCBs have been identified as a likely carcinogen for humans. If your service center is asked to pick up equipment that you suspect MAY contain PCBs, have it field tested BEFORE picking it up. Once you pick up a device that contains PCBs, the responsibility is yours.

This presentation addresses many of the most common safety hazards and situations that face service centers.

Near Miss? Near Hit? Close Call? No one ever wants to hear these phrases. These unplanned incidents have the potential of causing serious damage or injury. A good number of these narrow escapes come from a lack of defining proper processes and procedures. Too many people think “no harm, no foul.” Unfortunately, this does not address the root issue. Someone could have been seriously hurt. Not addressing the underlying problem will undoubtedly allow it to happen again.

The U.S. Occupational Safety and Hazard Administration (OSHA) recently released revised data for the top 10 OSHA violations for the 2019 fiscal year. For the ninth consecutive year, Standard Number 1926.501: General Requirements for Fall Protection lands at number one with 7,014 violations. This article will help you avoid violating this important standard ... or better yet, avoid an employee injury.

The Occupational Safety and Health Administration (OSHA) developed this COVID-19 planning guidance based on traditional infection prevention and industrial hygiene practices. It focuses on the need for employers to implement engineering, administrative, and work practice controls and personal protective equipment (PPE), as well as considerations for doing so.

While there have not been many changes to the U.S. Occupational Safety and Health Administration (OSHA) requirements over the past year, it is important to review some of the recent changes and remind you of some upcoming compliance obligations.

• OSHA 300 Recordkeeping & Reporting
• OSHA Reportable Incidents
• Silica & Beryllium Standards
• Hazardous Materials - Tier II Report

Over the last few months, “5+1 S” has served as a small but powerful acronym to describe the removal and continued avoidance of waste in all our business practices. Currents readers have had the opportunity to learn about the five “S” goals of sort, straighten, shine, standardize and sustain in previous articles focusing on lean service. In each of those articles, there has always been a reference to the additional “+1 S” focus on safety.