General guidance for performing brush seating or comutator reprofiling in the field.

EASA recommends using the lead wire specified by the original equipment manufacturer (OEM) whenever possible. If not available, some guidance is provided in section 6 of the EASA Technical Manual and an online calculator is available to determine a minimum recommended size based on temperature rating, expected current, number of leads and type of connection. This article will describe the calculator’s function.

The last couple of years, we have all heard a lot about digitalization, sensors, artificial intelligence, sustainability and machine learning. But what does it mean for us? This article focuses on the sensors and how they are linked to the electromechanical industry.

Variable frequency drives (VFDs) are more common than ever before.  Sometimes when a VFD is introduced into a motor driven system, system reliability suffers. This recording addresses some of the common factors that reduce motor driven system reliability and how to correct them.   

Occasions arise where original winding data is not available. It may have been recorded incorrectly or a different service center may have stripped the core but not completed the repair. In those cases, the service center must come up with a new “bare core” winding design. EASA's redesign software has some specific features to address this need.

Training, technical support, marketing content, speciality help and vendors are just a few of the tools available through easa.com.

In today’s world of electronic communication and banking, it’s always good to review cybersecurity reminders. Here are eight tips to keep in mind.

Findings from the from the fifth EASA research study conducted of end-user customers.

Revisit EASA's 2023 Convention & Solutions Expo by buying access to recordings of the general sessions and education events streamed from EASA's website! These recordings provide just over 32 hours of training. Downloadable PDFs of slides and technical papers are included!

This article describes some of the key characteristics and properties of lubricating greases and oils.