Facebook Twitter LinkedIn YouTube Menu Search Arrow Right Arrow Left Arrow Down Arrow Up Home Arrow Next Arrow Previous RSS Icon Calendar Icon Warning Icon
Proper Repair/Rewind Practices Maintain Efficiency/Reliability of Premium Efficiency/IE3 Motors  DOWNLOAD THE EXECUTIVE SUMMARY

Filter the results

  • Enter one or more words to find resources containing any of the words entered
  • Enter words or phrases between " " to find exact match

Resource categories

Resource Library

Principles of Medium & Large AC Motors, 1st Edition - IEC

  • February 2020
  • Number of views: 1751
  • Article rating: 5.0

This manual covers horizontal and vertical squirrel-cage induction motors in the 300 to 5,000 horsepower range, low- and medium-voltage. Most of the principles covered apply to other sizes as well. This manual focuses primarily on IEC motors and standards.

Induction Motor Speed Control Basics

  • March 2019
  • Number of views: 362
  • Article rating: No rating
Webinar recording

Induction motors are most often applied to what are essentially constant speed drive applications. However, the use of induction motors in variable speed applications continues to grow, primarily due to technology advances in power electronics. This webinar will review speed control basics for induction machines.

Induction Motor Rotor Windings: Squirrel-Cage and Wound Rotor Basics for the Technician

  • January 2018
  • Number of views: 701
  • Article rating: No rating
Webinar recording

This presentation covers induction motor basics for squirrel-cage and wound rotor motors

Help with form wound rotor wave connections

  • September 2015
  • Number of views: 593
  • Article rating: 4.0

For those who work almost exclusively with lap or concentric wound three-phase stators, wave wound rotor connections can be a challenge. This is especially true if connection data gets lost or if an existing winding connection is damaged during a failure. In these cases, it is useful to have a practical method for laying out a valid connection diagram. 

Ayuda para las conexiones de rotores bobinados con devanados ondulados de pletina

  • September 2015
  • Number of views: 572
  • Article rating: No rating

Para aquellos que trabajan casi exclusivamente con estatores trifásicos con devanados imbricados o concéntricos, las conexiones de los rotores bobinados con devanados ondulados pueden ser un reto. Esto es especialmente cierto, cuando los datos de conexión se pierden o cuando el fallo en el bobinado provoca daños en la conexión existente. 

Wound Rotor Repair Tips: Testing, Application and Failure Analysis

  • July 2013
  • Number of views: 32
  • Article rating: No rating
Convention presentation

Even though they comprise a small portion of electric motors in service, wound rotor motors are disproportionately represented in EASA’s tech support call volume. There are several misconceptions about how they work. This paper will describe how they are applied and explain several simple but critical tests for the repairer.

Trends & Solutions: Induction, Synchronous, DC and Wound Rotor Motors

  • July 2013
  • Number of views: 32
  • Article rating: No rating
Convention presentation

Is the induction motor the preferred answer in industrial drive applications? What is happening to the synchronous, DC and wound rotor motor (WRM) in those applications?

Wound rotor motor tips for failure analysis, repair and testing

  • November 2012
  • Number of views: 926
  • Article rating: 5.0

Wound rotor (WR) motors represent only a small fraction of all electric motors in service. In reviewing the EASA Technical Support call logs, one would conclude that there are many more wound rotor motors in service. Because many of us do not work on wound rotor motors often, it is understandable that not everyone has a clear understanding of how they differ from a squirrel cage motor. The purpose of this article is to dispel some misconceptions about how they work and to offer valuable tips for failure analysis, repair and testing. Other topics covered include: Secondary voltage Crane applications Testing tips, after assembly

How to properly test AC stator and wound rotor windings

  • October 2012
  • Number of views: 2578
  • Article rating: 3.8

There is much discussion in the industry about how to properly electrically test AC stator and wound rotor windings. Topics include test voltage, procedure, frequency and when to perform the various tests. This article describes how the following standards address these questions:

  • NEMA MG 1-2011
  • (MG1) IEEE 43-2000
  • (IEEE 43) IEEE 62.2-2004
  • (IEEE 62.2) IEEE 522-2004
  • (IEEE 522) IEEE 1068-2009
  • (IEEE 1068) ANSI/EASA AR100-2010
  • (AR100) CSA C392-2011 (C392)

These standards are regularly reviewed and coordinated, so some of the information may not match the old yellowed reference taped to your toolbox lid. These updated references should replace anything dated previous to the dates indicated on the standard. AR100 Section 4.3.1 lists the recommended tests for stator and wound rotor windings. They are insulation resistance (IR), winding resistance, growler, phase balance, surge comparison, polarity and ball rotation tests. This article covers the IR, winding resistance and surge tests. Noticeably absent from this list is the ever popular high potential (hi-pot) test. Topics covered also include: IR (or megohm) test Polarization index test Winding resistance test Surge comparison test Hi-pot test.

Use of variable frequency drives with wound rotor motors

  • October 2004
  • Number of views: 1221
  • Article rating: No rating

The slip ring or wound rotor induction motor (WRIM) has been used in a variety of applications. Many of these applications use the WRIM's high starting torque capability while limiting current to start and run very high inertia loads such as hammer mills, rolling mills, centrifuges, and rotary kilns. Other applications utilize the variable speed capability of the WRIM. Probably the most common use of WRIMs for variable speed is in crane and hoist service. Other variable speed uses for the WRIM include wiredraw machines, fans, blowers, pumps and refrigeration compressors. Many of these applications, if designed today, would utilize a standard induction motor and variable frequency drive (VFD), particularly those where speed control is the desired end result. When older WRIMs or their controllers fail, the best solution often is to replace both motor and control. There are situations, however, where the best solution may be to replace the old controller with a VFD and continue to use the WRIM. As always, the more knowledge we have about the equipment we work on the better equipped we are to make good choices about repairing, replacing or upgrading this equipment for our customers. With this in mind, a review of how the WRIM and some of its control schemes work seems appropriate.

Getting The Most From Your Electric Motors

Getting The Most From Your Electric Motors - coverThis 40-page booklet provides great advice for obtaining the longest, most efficient and cost-effective operation from general and definite purpose electric motors.

This booklet covers topics such as:

  • Installation, startup and baseline information
  • Operational monitoring and maintenance
  • Motor and baseline installation data
  • How to read a motor nameplate
  • Motor storage recommendations



EASA Technical Manual

EASA Technical Manual cover

The EASA Technical Manual is the association's definitive and most complete publication. It's available FREE to members in an online format. Members can also download PDFs of the entire manual or individual sections.


ANSI/EASA AR100-2020

ANSI/EASA AR100-2015 cover

Recommended Practice for the Repair of Rotating Electrical Apparatus
This is a must-have guide to the repair of rotating electrical machines. Its purpose is to establish recommended practices in each step of the rotating electrical apparatus rewinding and rebuilding processes.



EASA AR200: Guide for the Repair of Power and Distribution Transformers cover

Guide for the Repair of Power and Distribution Transformers
This document establishes guidelines for each step of the repair of power transformers, describing record keeping, tests, analysis, and general guidelines for the repair of power transformers.