This advertisement has been viewed 15 times. For sale
Posted: July 10, 2025
Condition: As is
Price: $4000
Item category: Shop equipment , Bake oven/Burnoff oven

PCP Burnoff oven-approx 41x47. With new water system. New burners in 2022. The inside needs new insulation, but otherwise, this is in good shape.

Person to contact: Brooks Adams
Company: Manville Electric Motor
Email: brooks@manvillemotor.com
Phone: +1 205-985-9505

Location of the item:

Manville Electric Motor 
188 Chandalar Place Drive 
Pelham, AL 
United States

This advertisement has been viewed 31 times. For sale
Posted: July 9, 2025
Condition: As is
Price: $150,000 CAD or best offer
Item category: Shop equipment , Winding equipment

Here we have a double sided hot press used for the manufacturing of resin rich high voltage coils. The machine can be used to press both slot sections of a high voltage coil at the same time or each side of the press can be used separately/independently. You are able to control temperature, pressure, and the timing of your pressing cycle through the Allen Bradley PLC and controller. The vertical and horizontal piston pressures can be controlled independently up to over 2000 psi and have a low and high pressure setting for your pressing cycle.

The machine was originally procured by one of the worlds largest electric motor OEMs until we purchased it from them.

The maximum straight section length of the press is approximately 10 feet, and the area inside the press heads is 5 inches wide by 7 inches high.

If you have any questions or concerns please let me know and do not hesitate to ask.

Photos are in the PDF file.

Person to contact: Lucas Santoro
Company: Renown Electric Motors & Repair, Inc.
Email: lucas@renown-electric.com
Phone: +1 647-921-5853

Location of the item:

Renown Electric Motors & Repair, Inc.
78 Bradwick Drive 
Concord, Ontario L4K1K8 
Canada

This advertisement has been viewed 26 times. For sale
Posted: July 7, 2025
Condition: As is
Price: $485,000 (Negotiable, Open to Offers)
Item category: Generator , Motor-generator set

This is a functional, stand-alone or grid-tied hydroelectric power station originally installed in the 1940s and comprehensively refurbished in 2020. It operated successfully through 2022 before being professionally decommissioned and disassembled in 2025. All components were match-marked and disconnected according to industry standards to ensure ease of reinstallation. Civil foundation drawing included for installation.

Price: $485,000.00 (Negotiable)

Please email rc@coleelectricms.com to request full picture and documentation package

Equipment: GE Synchronous Generator: 240 KW, 2300V, 3-phase, 720 RPM with shaft-driven DC exciter (125VDC, 38.5A)
Pelton Impulse Turbine: 321 HP, 720 RPM, 620 ft head, 10” penstock, 4.6 CFS flow, hydraulic deflector & manual control
Control Panel: GE panel with 5kV oil-filled breaker
Woodward Governor: With Allen Bradley PLC control for water deflection and turbine regulation
Battery Charger System: 80VDC for emergency shut-down (batteries not included)
Main Water Shutoff Valve: Electrically/mechanically operated with manual override

Person to contact: Randall Campbell
Company: Cole Electric Technology, Inc
Email: rc@coleelectricms.com
Phone: +1 404-691-9119

Location of the item:

Cole Electric Technology, Inc.
3980 Martin Luther King Jr Dr 
Atlanta, Georgia 30336 
United States

This advertisement has been viewed 51 times. For sale
Posted: June 27, 2025
Condition: As is
Price: Call
Item category: Shop equipment , Winding equipment

We are selling off most of equipment and winding supplies. Some of the bigger items we have are listed on our website at this address: https://www.caldwellmotors.com/collections/shop-equipment We have copper wire, lead wire, rewind tools, winders, forms, ovens and more for sale. Contact me below for more information: Hobie Caldwell Caldwell Electric Woodway TX 76712 254-772-1899 ohc@caldwellmotors.com

Person to contact: Otto Caldwell
Company: Caldwell Electric
Email: ohc@caldwellmotors.com
Phone: 254-772-1899

Location of the item:

212 Otis Drive 
Woodway, Texas 76712 
United States|US

This advertisement has been viewed 110 times. Wanted
Posted: June 3, 2025
Item category: Shop equipment

Gas burn out oven approx 60 x 60 inch. Wanting to burn out 1000 hp and less.

Person to contact: Steven Livingstone
Company: Alberta Rewind & Pump Services, Ltd.
Email: stevel@albertarewind.ca
Phone: +1 780-468-7175

Location of the item:

United States|US

This advertisement has been viewed 112 times. Wanted
Posted: June 2, 2025
Condition: Used, not reconditioned or disassembled (electrical)
Item category: AC motor

Customer is searching for a used electric motor. 500HP 1200RPM 5011LL 4160V

Person to contact: Chris
Company: Hand Industrial, Inc.
Email: cpowell@handindustrial.com
Phone: +1 806-345-3131

Location of the item:

United States|US

This advertisement has been viewed 129 times. Wanted
Posted: June 2, 2025
Item category: Shop equipment , Winding equipment

We are looking for various pieces of equipment used in the manufacturing of low and high voltage coils for both AC and DC motors. Pieces can including looping machines, spreaders/forming machines, taping machines and hot presses. This can also include newer equipment from modern manufacturers as well as older equipment from manufacturers such as Potter Rayfield & James. If you are looking to part ways with some of your equipment please let us know! Feel free to send any information and photos through email.

Person to contact: Jason Blake
Company: JB Enterprises
Email: jblakeenterprises@gmail.com
Phone: +1 647 921 5853

Location of the item:

United States|US

This advertisement has been viewed 137 times. For sale
Posted: May 27, 2025
Condition: As is
Price: $150,000
Item category: Shop equipment , Test equipment

Motor Test Set for Multi-horsepower AC and DC Motors Rated 1500 kVA, 480Vin. 60 Hz AC Taps from 480 V to 4160V. DC Armature Supply: 0-750V DC DC Field Supply:0-700V DC 90A, 5% Ripple RMS

Person to contact: Calvin Earp
Company: Shermco Industries, Inc.
Email: cearp@shermco.com
Phone: +1 214-675-9728

Location of the item:

2425 East Pioneer Drive 
Irving, TX 75061 
United States|US

This advertisement has been viewed 122 times. For sale
Posted: May 27, 2025
Condition: As is
Price: $3500
Item category: Shop equipment , VPI systems/Impegnation tanks

Dip tank with electric (roll up door) cover. 34" diameter x 40" deep hole for shaft extension

Person to contact: Calvin Earp
Company: Shermco Industries, Inc.
Email: cearp@shermco.com
Phone: +1 214-675-9728

Location of the item:

2425 East Pioneer Drive 
Irving, TX 75061 
United States|US

This advertisement has been viewed 130 times. For sale
Posted: May 21, 2025
Condition: As is
Price: $4800 USD
Item category: Shop equipment , Winding equipment

Mc Broom winding machine with electric counter

Person to contact: Jesse Neal
Company: West State Electric, LLC
Email: jesse@west-state.net
Phone: +1 270-366-5910

Location of the item:

2303 Mayfield Hwy 
Benton, Kentucky 42025 
United States|US