This presentation reviews procedures that explain how to identify unmarked leads of three-phase motors with one or two windings.

This presentation focusses on critical close fit tolerances and certain surface finish specifications.

When a core loss test reveals localized hot spots, or visual inspection identifies physical damage, the ability to repair the damage in a cost-effective manner means the difference between repair or replacement.

This presentation provides a high-level overview of the program and is intended for anyone wanting to learn more about the ERT program. 

Learn how to effectively use EASA's live, ever-expanding online database of more than 250,000 windings.

This focused introduction will explain the what, how and why of static-couple balancing from a practical point of view.

Are you encountering high no-load current or high current with load? This presentation will look into the causes and cures.

When preparing to rewind random or form-wound status, sometimes there just doesn’t seem to be enough room in the stator slot for the desired conductor area and insulation quantities. This presentation looks at balancing stator copper losses against insulation reliability.

When repairing centrifugal and axial flow pumps, axial thrust is a concern. An understanding of the causes and the mitigating provisions of various pump designs will help repair technicians to ensure those provisions work properly.

This presentation addresses many of the most common safety hazards and situations that face service centers.