Dirigida principalmente al personal del centro de servicio, la guía, que ahora es un documento independiente y no forma parte del informe completo del estudio de rebobinado de EASA/AEMT, describe los métodos de reparación de buenas prácticas utilizados para lograr los resultados proporcionados en ambos estudios. Contiene consejos de reparación, terminología relevante del motor e información sobre fuentes de pérdidas en motores de inducción que afectan la eficiencia.

En toda reparación mecánica, la capacidad para desmontar, reparar y volver a montar el motor de forma apropiada sin dañar innecesariamente ninguna de sus piezas es fundamental.

Esta obra contiene muchas sugerencias sobre el manejo apropiado de las diferentes partes de un motor para minimizar los daños durante el proceso de reparación. Sin embargo, es imposible desarrollar un listado que las incluya todas.

En cambio, el principio básico de tomarse el tiempo para usar la herramienta adecuada y por lo general el procedimiento apropiado guiará a los técnicos por el camino correcto.

Determining the source of noise in a motor is often much more challenging than correcting it. However, a methodical approach to investigating the noise can narrow down the possible causes.

Intended primarily for service center personnel, the guide which is now an independent document and not part of the complete EASA/AEMT rewind study report, outlines the good practice repair methods used to achieve the results given in both studies. It contains repair tips, relevant motor terminology, and information about sources of losses in induction motors that affect efficiency.

A special discounted collection of 9 webinar recordings focusing on a wide variety of vibration, balancing and alignment topics.

Just $45 for EASA members!

This manual covers horizontal and vertical squirrel-cage induction motors in the 300 to 5,000 horsepower range, low- and medium-voltage. Most of the principles covered apply to other sizes as well. This manual focuses primarily on IEC motors and standards.

Although the earliest practical DC motor was built by Moritz Jacobi in 1834, it was over the next 40 years that men like Thomas Davenport, Emil Stohrer and George Westinghouse brought DC machines into industrial use.  It’s inspiring to realize that work-ing DC motors have been around for over 160 years. For the past century, DC machines over 30 or 40 kW have been cooled in the same manner – by mounting a squirrel cage blower directly over the commutator.

On occasion, service centers are asked to balance fan blades that are designed for an overhung mounting. The fan blade may be received mounted on the shaft, or without any shaft. The decision has to be made about how to mount the rotor in the balancing machine. One solution is to fabricate a mandrel to balance the fan blade between the machine pedestals. The other alternative is to mount the fan blade on the end of the shaft in an overhung configuration, with the fan blade outboard of both balancing machine pedestals. This would be the more expedient method if the fan blade is already mounted on the shaft in the overhung configuration.  How the fan blade is mounted doesn’t change the balance, as long as the fit to the shaft doesn’t change. So the question is, “Which is easiest?” Often it is easiest to mount the rotor in the overhung configuration, but balancing in that configuration presents some challenges. Those challenges are addressed here. 

This presentation shows a methodical approach and techniques for tackling this difficult balancing problem.

Most service centers balance rotors routinely, with few surprises in the process. Most of us do not balance fans nearly as often as rotors. The fan balancing tips in this article should be helpful.

Most of us involved in the repair of electrical equipment have a good understanding of how an electric motor works — especially the stator and rotor. But the fan can appear deceptively simple. Fans are pretty interesting, once we learn a few "affinity laws" — rules that also apply to blowers and impellers. This article will review some basic facts about fans that explain how small changes to a fan can make a BIG difference.