Document Before You Strip - ANSI Accredited Standards...
Facebook Twitter LinkedIn YouTube Menu Search Arrow Right Arrow Left Arrow Down Arrow Up Home Arrow Next Arrow Previous RSS Icon Calendar Icon Warning Icon

Questions?

For information about ANSI/EASA AR100 or questions about the work on this standard, contact:

Mike Howell, PE
EASA Technical Support Specialist
+1 314 993 2220
mhowell@easa.com

ANSI Accredited Standards Developer Information

Document Before You Strip

A Repeatable Method for Documenting Complex Three-Phase Windings

  • November 2026
  • Number of views: 243
  • Article rating: No rating

Jonathan Robinson
Technical Education Committee Member
Burford Electric Service, Inc.

When rewinding a typical three-phase motor, an experienced motor winder can usually identify the winding pattern quickly. Coil pitch, group spacing and internal connections often repeat in a predictable manner. Years of winding experience is valuable because it saves time. However, there are also motors where anticipating a repeating pattern can get a repair center in trouble.

Some motors have windings that are not as symmetrical as winding technicians normally expect. A few examples are interspersed PAM (pole amplitude modulation) motors or interspersed Dahlander winding motors. Both motors are two-speed, one-winding designs. On motors like these, an incorrect assumption about how the winding repeats can result in a rewind that looks physically correct, at first glance, but does not operate correctly.

This creates a simple but serious problem: the winding in front of you may be the only copy of the original design. Once it is stripped, information that was not recorded is gone. For that reason, our repair center uses a slot-to-slot documentation method for complex windings that is intentionally slow and repetitive on the front end. This extra time on the front end is minor compared to the time and cost involved in reconstructing a complicated winding after the original has been destroyed and removed.

MEMBERS ONLY CONTENT - LOGIN REQUIRED

AVAILABLE IN SPANISH

0Upvote 0Downvote
Rate this article:
No rating
Print


Comments are only visible to subscribers.

EASA Rewind Study cover

The Effect of Repair/Rewinding on Premium Efficiency/IE3 Motors
Tests prove Premium Efficiency/IE3 Motors can be rewound without degrading efficiency.

DOWNLOAD THE FULL RESULTS

BUY PRINTED COPIES

EASA Good Practice Guide

Good Practice Guide to Maintain Motor Efficiency
Based on the 2019 and 2003 Rewind Studies of premium efficiency, energy efficient, IE2 (formerly EF1) and IE3 motors

LEARN MORE & DOWNLOAD